Printing is one of the most important topics in Citrix networks. In this lab, we will be working on printing configurations and policy settings to optimize printing functions in a Citrix XenApp farm. When a user connects to the Citrix Farm, if the farm administrator permits, the users’ printers will be mapped to the Citrix… Read more PART 20 – Printing in Citrix XenApp 6.5
In this post I will show you how to install and configure EdgeSight 5.4 for monitoring your XenApp farm. Prepare a server with IP address 192.168.1.11. On the Windows Server 2008 R2, ensure that the TimeZone is correct. Change the time to match that of the Domain Controller. Configure the TCP/IP Enable Remote Desktop Change… Read more PART 19 – EdgeSight 5.4 Installation and Configurations
Storefront replaces the Web Interface. Web Interface is supposed to be EOL in 2015. Storefront can be used internal only. On the other hand, Netscaler can be used both external or internal. Most of the time it is being used externally. There are many products / proxy / gateways out there but it is good… Read more PART 18 – Citrix Storefront Installation and Configurations
Citrix XenApp Policies are settings for XenApp servers; for example, they can be rules that govern user connections and server settings, etc… Below are some facts about Citrix XenApp 6.5 Policies. There are two types: Computer Policies and User Policies. There are different 7 templates as well which cannot be edited. Found under: AppCenter ->… Read more PART 17 – Citrix XenApp 6.5 Policies
It is very important to understant the concept of the Citrix XenApp Login Process so that we can troubleshoot our Citrix Farm whenever there is an issue to it. Below is a simple diagram showing step by step how the Citrix XenApp Login process takes place. The client device with Citrix Receiver (ICA Client) connects… Read more PART 16 – The Citrix XenApp Login Process
The proper way to access our published applications is through the use of a NetScaler. However, we have not deployed a NetScaler Gateway yet. Therefore, in this blog post I will show you how to access your applications from the Internet by forwarding HTTP traffics to your Web Interface server from the firewall perspective. This… Read more PART 15 – How to Launch TeamViewer Application from The Internet
In this blog I will show you how to launch the published application (TeamViewer). Let’s perform this on a Windows 8 Professional client computer inside the LAN. Install Citrix Receiver. Click Yes on User Account Control. Click Next. Accept the License and click Install. Wait for the installation to take place. Click Finish. Make sure… Read more PART 14 – How to Launch Teamviewer Application from XenApp
We have successfully published the TeamViewer application in our XenApp farm environment. We need a way for users to access it. This session will take you to the configurations of the Web Interface. Web Interface is being replaced by StoreFront which we will also configure in the next lab. Start -> Administrative Tools -> Citrix… Read more PART 13 – Citrix XenApp 6.5 Web Interface Configuration
After installing the application, we now are ready to publish it so that users can connect to it and use it. In AppCenter -> Citrix Resources -> XenApp -> Applications – Right-click Publish application. At Welcome screen click Next. Display Name: Type “My TeamViewer”. Click Next. Choose Type of application to publish. We can publish… Read more PART 12 – Publishing Applications in Citrix XenApp Server 6.5
Control Panel -> All Control Panel Items -> Click Install Application on Remote Desktop… (In this lab, I Downloaded teamviewer from the teamviewer web site for this test process.) Click Next. The installation program tries to look for installers in the CDROM or Floppy Drive After unsuccessfully searched, it prompts… Read more PART 11 – How to Install Applications on Citrix XenApp Server 6.5